- Certificate / Product Information -
RAVENOL Super Synthetic Truck SAE 5W-30
The cold viscosity SAE 5W ensures reliable cold starting in extreme temperatures (low cold-starting wear) and the quickest possible supply to all lubricating points. The high-temperature viscosity SAE 30 safely masters extreme stress. Friction loss and wear are reduced.
Application Notes
RAVENOL Super Synthetic Truck SAE 5W-30 is an all-season Low SAPS high performance commercial vehicle motor oil fine tuned for the new exhaust emission directives. All-season use in EURO IV and EURO V engines.RAVENOL Super Synthetic Truck SAE 5W-30 is suitable for oil change intervals according to manufacturer specifications to over 100,000 km.
Specifications
ACEA 2004 E6, ACEA 2004 E7, ACEA 2002 E4
Approvals
MB 228.51, MAN 3477
Practice and tested in aggregates with filling
MTU Type 3.1, VOLVO VDS-3, Renault RXD
Characteristic
RAVENOL Super Synthetic Truck SAE 5W-30 offers:- Outstanding detergent properties, no residues in the engine
- Outstanding dispersing properties – prevents cold sludge and residue formation
- Extends the life of the particle filter by reducing the tendency to form particles
- Low sulphate ash-, phosphorus- and sulphur content “Low SAPS”
- Outstanding wear protection
- Outstanding oxidation stability
- Outstanding high temperature stability, high viscosity index
- Low fuel consumption for cost effectiveness
- Outstanding cold starting properties
Article number: 1121101
Packages:
5L|1121101-005-01-999
10L|1121101-010-01-999
20L|1121101-020-01-999
60L|1121101-060-01-999
208L|1121101-208-01-999
Characteristics | Unit | Data | Audit |
---|---|---|---|
Colour | gelbbraun | - | |
Density at 20°C | kg/m³ | 852 | EN ISO 12185 |
Viscosity at –30°C | mPa.s | 6490 | DIN 51 377 |
Viscosity at 40°C | mm²/s | 76 | DIN 51 562 |
Viscosity at 100°C | mm²/s | 12,3 | DIN 51 562 |
Viscosity index VI | 160 | DIN ISO 2909 | |
Flash point (COC) | °C | 226 | DIN ISO 2592 |
Pourpoint | °C | -54 | DIN ISO 3016 |
TBN | mg KOH/g | 12,6 | DIN ISO 3771 |
Sulphated ash | %wt. | 1,0 | DIN 51 575 |
All indicated data are approximate values and are subject to the commercial fluctuations.
All information correspond to the best of our knowledge to the actual situation of the cognitions and our development. Subject to alterations. All references made to DIN-norms are only for the description of the goods. There is no guarantee. In case there will be any problems please contact the technical service.
24.03.2016Ravensberger Schmierstoffvertrieb GmbH
Postfach 1163
33819 Werther
Tel.: 05203/9719-0
Fax.: 052039719-40 / 41