- Certificate / Product Information -
RAVENOL DPS Fluid
Special Fluid
RAVENOL DPS Fluid is synthetic special fluid with special additives and inhibition which was developed for use in Dual Pump System (DPS) by Honda in the Service Fill area.
Application Notes
RAVENOL DPS Fluid is used in vehicles with 4WD Real Time, e.g. Honda CR-V, Honda Element, Honda Odyssey, Honda Fit, Honda Orthia u.a.
Quality Classifications
Practice and tested in aggregates with filling
Honda DPFII (DPSF), Honda 08293-99904, Honda DPSF2 Ultra 4WD Rear, Honda 08200-9007
Characteristic
RAVENOL DPS Fluid offers:
- Superior resistance to lubricant failure und hard operating conditions
- Very good lubricating properties even at low temperatures in winter
- High and stable viscosity index
- Oxidation resistance and thermal stability
- Extensive protection against wear, corrosion and foaming
- Good balanced coefficient of friction
- High thermal and oxidative stability
- An excellent cooling capacity.
RAVENOL special fluid is special
development for special units and cannot be selected on the basis of technical parameters (viscosity, etc.). Therefore
the decision was made not to give
technical data.
Please note: RAVENOL special fluid
is exclusively to apply under the original
number, as indicated in the product information. Not sure of the correct fluid, you can ask your
garage or the car dealer with respect to the original
OEM type and number
or consult our advisers.
It must be specified the VIN code (Vehicle
Identification Number) of your vehicle.
Misapplication of RAVENOL special fluid can lead
to malfunction of the unit
and cause failure.
Ravensberger Schmierstoffvertrieb
GmbH does not liable for failures in case of wrong selection of RAVENOL special
fluid.
Article number: 1211113
Packages:
1 L|1211113-001-01-999
4 L|1211113-004-01-999
10 L|1211113-010-01-999
20 L|1211113-020-01-999
60 L|1211113-060-01-999
208 L|1211113-208-01-999
Characteristics | Unit | Data | Audit |
---|---|---|---|
Colour | red | visual | |
Density at 20°C | kg/m³ | 843 | EN ISO 12185 |
Pourpoint | °C | -54 | DIN ISO 3016 |
All indicated data are approximate values and are subject to the commercial fluctuations.
All information correspond to the best of our knowledge to the actual situation of the cognitions and our development. Subject to alterations. All references made to DIN-norms are only for the description of the goods. There is no guarantee. In case there will be any problems please contact the technical service.
23.03.2016Ravensberger Schmierstoffvertrieb GmbH
Postfach 1163
33819 Werther
Tel.: 05203/9719-0
Fax.: 052039719-40 / 41